One of the biggest advantages of EPS Cement Sandwich Wall Panel is its extremely low maintenance requirement, but a few simple regular checks can easily extend its service life to over 30 years. The first maintenance step for your EPS Cement Sandwich Wall Panel is to do a simple visual check once a year, especially after extreme weather like heavy rain or strong wind. Look for any small cracks in the sealant between each EPS Cement Sandwich Wall Panel, and replace the sealant immediately if you find any damage.

For daily cleaning of an EPS Cement Sandwich Wall Panel, you do not need any special chemical cleaners. Just use a soft damp cloth with a little neutral detergent to wipe the surface of the EPS Cement Sandwich Wall Panel. Avoid using hard steel brushes or strong acidic cleaning products, which will scratch the cement outer layer of the EPS Cement Sandwich Wall Panel and damage its water-resistant performance.

If you need to drill new holes or make changes on an existing EPS Cement Sandwich Wall Panel, always use a diamond-tipped drill bit. Regular drill bits will cause unnecessary vibration that may create hidden tiny cracks inside the EPS Cement Sandwich Wall Panel. A diamond bit cuts smoothly and keeps the surrounding area of the EPS Cement Sandwich Wall Panel completely intact.

You do not need to repaint an EPS Cement Sandwich Wall Panel very often. The cement surface of a qualified EPS Cement Sandwich Wall Panel is very stable, and a good quality latex paint applied on it can last 10 to 15 years before needing a refresh. This is 3 times longer than the repainting cycle of traditional drywall, which saves you a lot of time and decoration cost over the years.