Painting EPS Cement Sandwich Wall Panel is much easier than painting traditional plastered walls, but there are a few simple steps you need to follow to get a perfect result. First, wait at least 72 hours after installation before you start painting. This gives the adhesive and sealant between each EPS Cement Sandwich Wall Panel enough time to fully cure and stabilize.

Second, apply one coat of alkali-resistant primer on the whole surface of the EPS Cement Sandwich Wall Panel. The cement surface of a new EPS Cement Sandwich Wall Panel has slight natural alkalinity, and this special primer will neutralize it completely. Without this primer, your topcoat paint will start to peel off after 1-2 years. The primer also helps the paint stick much better to the EPS Cement Sandwich Wall Panel surface.

After the primer is fully dry, you can apply two coats of high-quality latex paint. You can use a regular paint roller to apply the paint on EPS Cement Sandwich Wall Panel, and you will get a perfectly smooth finish in no time. You do not need to do any sanding or putty work on the EPS Cement Sandwich Wall Panel surface before painting, which saves you hours of messy work compared to painting drywall.

If you want a textured finish, you can also apply wallpaper, decorative stucco, or even thin wood veneer directly on the EPS Cement Sandwich Wall Panel after the primer is dry. The stable flat surface of the EPS Cement Sandwich Wall Panel supports almost all kinds of wall decoration materials perfectly.