Installing an EPS Cement Sandwich Wall Panel does not require specialized heavy equipment, making it perfect for small construction teams and DIY enthusiasts. First, prepare a level, clean base track along the marked wall line on your floor, securing it with anchor bolts every 60 centimeters. Next, lift the pre-cut EPS Cement Sandwich Wall Panel into the track, tilting it gently until it stands perfectly vertical, and use a temporary brace to hold it in place. The third step is to connect adjacent panels with the built-in tongue-and-groove edges, applying a thin layer of cement adhesive in the joint to create a seamless, airtight seal. After all panels are positioned, screw metal connectors through the panel edges into the top floor joist to lock the entire wall structure in place. Finally, apply a thin skim coat of finishing mortar over the joints and screw heads, and your EPS Cement Sandwich Wall Panel is ready for painting or tiling. This entire process takes less than one day for a standard 10-square-meter wall, far faster than laying bricks block by block.