Different construction projects have different requirements for wall thickness, performance parameters and panel size, and selecting the right EPS Cement Sandwich Wall Panel specification is the first step to get a perfect wall system that fits your project perfectly. If you choose an unsuitable specification, you may either waste extra money on unnecessary over performance, or find that the panel cannot meet the actual usage demand of your project. Before you place the order for the panels, you need to sort out several key information of your project first, including the usage scenario of the wall, the local climate condition, the fire protection requirement and the budget range.

The most important parameter you need to choose first is the thickness of the EPS Cement Sandwich Wall Panel. The most common standard thickness specifications in the market are 75mm, 100mm, 120mm and 150mm. For the internal partition walls in ordinary apartments, small offices and residential houses, the 75mm or 100mm thick panel is usually enough to meet all the requirements for strength, sound insulation and fire resistance. If you are going to use the panel as the exterior wall of the building, or the partition wall between two independent units in an apartment building, it is recommended that you choose the 120mm or 150mm thick specification, which has better thermal insulation performance and higher sound insulation effect. For special projects such as factory workshops, cold storage buildings and data centers, you can even choose thicker customized panels to get the ultra-high thermal insulation performance that the project needs.

Besides the panel thickness, you also need to check the detailed technical parameters of the product before purchasing. You should confirm the density of the outer calcium silicate board, the density of the EPS core, the fire rating level and the actual measured sound insulation value of the panel. It is also a very wise idea to ask the supplier to provide the third party test report of the product, to make sure the actual performance of the product can meet the design requirements of your project. If your project has special requirements such as extra high waterproof performance or anti impact performance, you can communicate with the supplier in advance to get customized EPS Cement Sandwich Wall Panel products that are specially optimized for your scenario. By selecting the right specification, you can get the best cost performance and the most suitable wall solution for your specific project.