One of the biggest advantages of EPS Cement Sandwich Wall Panels over other partition materials is their extremely low maintenance requirements, but that does not mean they require zero care at all. A small amount of simple, regular maintenance will keep your office partitions looking brand new and performing perfectly for 20 years or more, and this complete guide will show you exactly how to take care of your panels with minimal time and effort.

The most basic regular maintenance task you will need to do is simple regular cleaning, which is extremely easy thanks to the smooth, hard cement surface of the panels. Unlike porous drywall that stains very easily and is hard to clean, the non-porous cement facing can be wiped down with a soft damp cloth and a mild, non-abrasive commercial cleaning solution to remove fingerprints, scuff marks, coffee spills, and dirt that builds up from regular office use. You do not need any special cleaning products, and you do not have to worry about the surface getting damaged or stained by mild cleaning chemicals. For tougher scuff marks from office chairs or moving carts, you can use a soft nylon scrub pad to gently rub the mark away without scratching or damaging the wall surface. You should avoid using very harsh abrasive cleaning products or sharp metal scrubbers, but almost all standard commercial office cleaning supplies are completely safe to use on these panels.

Beyond regular cleaning, there are only a few very simple periodic checks you should do every 6 to 12 months to keep your partitions in perfect condition. First, walk around all your partition walls and check the joints between panels to make sure none of the joint filler has cracked or come loose. If you notice any small cracks forming at the seams, you can easily touch them up with a small amount of joint filler, sand it smooth, and touch up the paint to make the wall look completely new again. Next, check all the L-brackets and mounting points that secure the panels to the floor and ceiling, to make sure none of the screws have come loose over time. Tightening any loose screws takes just a few minutes, and it will keep your walls perfectly stable and solid for years. You should also inspect any areas near doors or high-traffic zones where people might bump into the wall, to make sure there are no small chips or damages that need to be touched up. That is all the maintenance you will ever need: no regular repainting cycles, no mold treatment, no warped panel replacement, and no expensive repairs. This extremely low maintenance requirement is one of the biggest reasons EPS Cement Sandwich Wall Panels are such a favorite among busy commercial facility managers who do not have time to constantly deal with partition wall problems.