Field workers do not need expensive professional equipment to cut and customize the EPS Cement Sandwich Wall Panel to fit special dimensions on construction sites. For straight line cuts on the EPS Cement Sandwich Wall Panel, you can use a regular electric circular saw fitted with a diamond tipped blade, which will give you a clean, smooth cut edge in seconds. If you need to make curved cuts or small notches on the EPS Cement Sandwich Wall Panel, a handheld electric jigsaw will handle this work perfectly with very little effort. When you need to carve shallow grooves on the surface of the EPS Cement Sandwich Wall Panel to embed electrical wires or water pipes, a portable wall chaser will create the exact groove depth you need without cracking the panel. Always wear a dust mask and eye protection when cutting the EPS Cement Sandwich Wall Panel, to avoid inhaling fine cement dust generated during the processing work. Even without specialized factory customization, you can adjust every EPS Cement Sandwich Wall Panel to fit any complex on site dimension requirement.