When you are planning a factory expansion, it is very important to compare the total full lifecycle cost of different wall materials, not just the initial upfront material price. When you do a complete apples-to-apples cost comparison between the EPS Cement Sandwich Panel and traditional brick walls, you will see that the panels deliver a far better financial value, saving you money at every single stage of your project and long after construction is finished. For the initial construction phase, the total installed cost of an EPS Cement Sandwich Panel wall is usually 20% to 30% lower than a full traditional brick wall with separate added insulation, plaster and finishing. The brick wall itself might seem cheaper per square meter at first glance, but once you add up all the extra costs including mortar, insulation materials, plaster, paint, and the huge labor cost for skilled masons working for weeks, the total cost quickly becomes far higher. You also save money on the foundation. Because the brick wall is 10 times heavier, you need a much thicker, stronger reinforced concrete foundation to support it, which adds another 15% to 20% extra cost to your total project. The biggest long-term cost saving comes from energy bills. A standard 100mm EPS Cement Sandwich Panel has 5 times better thermal insulation performance than a 200mm thick solid brick wall. Over the 25 year lifespan of your factory, this adds up to more than tens of thousands of dollars in reduced heating and cooling costs, that you would otherwise be wasting every single year with a brick wall. Brick walls also require regular maintenance. They develop cracks after a few years, need annual patching, re-plastering and repainting, and can develop water damage that requires expensive repairs. The EPS Cement Sandwich Panel needs almost no maintenance at all, you will not spend thousands of dollars on wall repairs over the decades. Even the time cost is a massive financial difference. You can install the panel walls 5 times faster than brick walls, which means you can start production in your new expansion months earlier, generating extra revenue that you would lose if you waited for slow traditional construction. When you add up all these costs across the full 25 year lifecycle, the EPS Cement Sandwich Panel ends up costing less than half the total cost of a traditional brick wall, while delivering far better performance, safety and comfort. This makes it clearly the smarter financial choice for any factory expansion project.